Products
Showing 31–45 of 227 resultsSorted by popularity
-
Wraps, Strips and Putties
Metacaulk Putty Pads
DESCRIPTION: Moldable, non-curing, single-component, intumescent pliant in pad form for through-penetration systems.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- For interior use with various penetrations (cabling, EMT pipe, conduit, etc.); no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
- Easy to install; applied by hand; no curing time; adheres to all common building surfaces
- Helps provide a barrier or buffer for energized bus ducts or conduits as well as provide a barrier from vibration and movement; no additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box
- Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and ASTM E119 (UL 263); STC Rating 60; only 1/8″ thickness needed for 1-2 hr fire rating; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero
SKU: n/a -
Devices and Large Openings
Metacaulk Mortar
DESCRIPTION: Rapid-hardening compound of gypsum and cement for large opening through-penetrations in floors and walls (ideal for cable trays, power cables, fiber optic telephone cables, etc. [not aluminum]).
FEATURES:
- Best combination of workability, strength & fire resistance; safe and simple to use; high yield per pound
- Workable in approximately 45 minutes with non-sag adjustable consistency (pourable or trowelable); no special tools needed to mix or install
- Ideal for large openings containing multiple penetrants
- Sets without shrinking; forms rigid, gas tight, fire-resistant seal that can easily be cut/drilled/resealed if future penetrants are needed
- Protected in wet & dry stages against mold growth with a combination of biocides
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479)
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Joint Strip
DESCRIPTION: Flexible, precured dry intumescent strips used for concrete & masonry floor & wall joints up to 2″ (51 mm) wide, duct insulation and up to 4″ PVC/CPVC & membrane penetrations.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; single-sided application
- Highly versatile, flexible; economical
- May be covered with any color standard architectural caulk; no firestop caulk required
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) & ASTM E1966 (UL 2079); VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Devices and Large Openings
Metacaulk Intumescent Sleeves
DESCRIPTION: Flexible design of durable galvanized steel outer shell lined with precured dry intumescent that easily conforms to contours of pipes for through-penetrations and angled penetrations, ideal for retrofit and flammable pipes penetrating an uneven concrete fluted deck assembly.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy installation without modifications, steel bolts or fasteners; fasten with fiberglass tape, pop rivets or hose clamps around pipe
- Economical and saves on labor cost; no measurement of material required
- No need to firestop both wall penetration sides; can be installed from top or underside for floor applications; eliminates need for collars/wrap strips
- Can be retrofitted, easily removed and replaced material
- Ideal for large PVC or engineer plastic pipes going through concrete fluted decks
- Ideal for applications when pipes are installed on at an angle
- Ideal for installing around a coupling located in floor and wall openings
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115; tested for PVC, CPVC, ABS and PVC/ABS Foam Core, FRPP, PP; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Devices and Large Openings
Metacaulk Intumescent Collars
DESCRIPTION: Prefabricated device with precured dry intumescent designed for the circumference of open and closed through-penetrations diameters from 1 & 1/2″ up to 6″ (38 – 152 mm), with securing interlocking tab mechanism for easy installation.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Economical, easy to install, saves on labor; design greatly cuts time and expense comparatively
- Fits in limited access areas; no measurement of material required
- FBC System compatible
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115; tested for PVC, CPVC, ABS and PVC/ABS Foam Core, FRPP, PP, and Aquatherm; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Devices and Large Openings
Metacaulk Firestop Pillows
DESCRIPTION: Ready-to-install package of layered precured dry intumescent, made for use in large openings with cables, cable trays, blank openings or multiple penetrating items.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install with no tools and no cure time required; no wire mesh required in certain installations (some UL designs using multiple pillows require sealant or putty to fill in the gaps)
- Reusable & can be removed/reinstalled if needed
- Cost effective and versatile
- Two sizes available
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Cover Guard
DESCRIPTION: Precured dry intumescent one-component fire-rated gasket for use with electrical boxes when addressing steel electrical box penetrations in fire-rated assemblies (the “24 inch rule”).
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; applied by hand; mounted on inside of cover plate & installed simultaneously
- Covers opening; does not take up volume in electrical box
- Economical, labor-saving (compared to putty pads); great for retrofit jobs
- Reduces sound transmission
PERFORMANCE: Tested in accordance with ASTM E119 (UL 263), ASTM E814 (UL 1479) and ASTM E90; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; STC Rating 54
SKU: n/a -
Devices and Large Openings
Metacaulk Composite Sheet
DESCRIPTION: Preassembled panel constructed of precured dry intumescent sheet sandwiched between two thin, rigid steel panels, for enclosing large openings and for cutting and forming to custom or irregular shapes. Used for sealing penetrations and/or restoring fire rating to floors, walls and ceilings with penetrating openings, and can be used in conjunction with other Metacaulk products (sealants, putties and collars) to ensure cold smoke seal.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Lightweight, thin sheets are easy to handle, cut and form to desired or irregular shape
- Easy to install using common trade tools; fasten, bolt punch or drill through using self-tapping screws or anchor bolts; no mixing or damming for clean install; cost-effective low labor install; is re-enterable
- Non-flame supporting and thermally conductive: allows unwanted heat build-up to escape
- Corrosion resistant
- FBC System compatible
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479); VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Devices and Large Openings
Metacaulk Cast-In-Place Device (CID)
DESCRIPTION: Single-component device with precured dry intumescent, for casting into concrete, that provides through-floor penetration firestop protection for plastic pipes, metal pipes, insulated pipes and all types of cabling.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Reduces labor time by eliminating need for drilling of concrete
- Accessories include snap-on height extensions, corrugated floor deck adaptors, and installation snap-on cover caps
- FBC System compatible
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115; VOC compliant (CDPH Standard Method v1.2); Class 1 W Rating; complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Box Guard
DESCRIPTION: Precured dry intumescent one-component fire-rated pad for use in electrical boxes to maintain the integrity of fire-rated wall assemblies.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; applied by hand; adheres to back of electrical box
- Economical, labor-saving (compared to putty pads); great for retrofit jobs
- Reduces sound transmission
PERFORMANCE: UL Classified system; tested in accordance with ASTM E90, ASTM E814 (UL 1479) and ASTM E119 (UL 263); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; STC Rating 53
SKU: n/a -
Sealants and Sprays
Metacaulk 835+ Firestop Silicone Sealant & Spray
DESCRIPTION: Silicone-based elastomeric sealant, self-leveler and spray for firestopping joint openings where constant dynamic movement is expected.
FEATURES:
- Exterior/Interior use; resistant to weather and chemical exposure
- Forms a water/rain-resistant seal after 1 hour; excellent moisture resistance
- 2-year shelf life
- Excellent freeze-thaw
- Non-sag, flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- FBC System compatible (except spray)
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM E1399 and ASTM E90; Self Leveling: meets ASTM C920, Type S, Grade SL, Class 25, Use NT, M, A; Caulk, 5 Gallon, Cartridge: meets ASTM C920, Type S, Grade NS, Class 25, Use NT, M, G, A, O; VOC compliant (CDPH Standard Method v1.2); STC Rating 55
SKU: n/a -
Sealants and Sprays
Metacaulk 150+ Firestop Sealant
DESCRIPTION: All-purpose, heat-expanding sealant for construction joints and through-penetrations.
FEATURES:
- Excellent freeze-thaw
- Non-sag, flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- Versatile interior use; water-based seal requires no mixing or dilution; paintable
- Protected in wet & dry stages against mold growth with a combination of biocides
- Safe and easy to use for most applications (including retrofit); can be applied with conventional caulking gun, bulk loading gun, troweled from pail, or pumped directly from pail
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM C834, ASTM E1399, ASTM E90, and CAN/ULC-S115; VOC compliant (CDPH Standard Method v1.2); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; STC rating 65
SKU: n/a -
Sealants and Sprays
Metacaulk 1200 Firestop Sealant
DESCRIPTION: Extremely flexible single-component elastomeric sealant and spray for construction joint openings, curtain walls and large openings containing metallic penetrants, which cures to mastic suitable for dynamic movement areas and fire-rating.
FEATURES:
- 3-year shelf life
- Excellent freeze-thaw
- Non-sag, highly-flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- Versatile interior use; water-based seal requires no mixing or dilution; paintable
- Protected in wet & dry stages against mold growth with a combination of biocides
- Easy to apply: sprayable, brushable, trowelable, caulkable, & pourable- mastic grade for efficient installation on long joint runs, self-leveling for horizontal use when fast installation is needed & caulk grade for easy-to-apply using caulk gun/trowel
- FBC System compatible
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM E1399, and ASTM E90; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; VOC compliant (CDPH Standard Method v1.2); STC Rating 65
SKU: n/a -
Sealants and Sprays
Metacaulk 1000 Intumescent Firestop Sealant
DESCRIPTION: General-use, single-component, intumescent sealant and smoke seal for construction joints & through-penetrations. Cures to elastomeric seal suited to dynamic motion.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- 3-year shelf life
- Excellent freeze-thaw
- Non-sag, flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- Versatile interior use; water-based seal requires no mixing or dilution; paintable
- Protected in wet & dry stages against mold growth with a combination of biocides
- Safe and easy to use for most applications (including retrofit); no special skills necessary to install; can be applied with conventional caulking gun, bulk loading gun, troweled from pail, or pumped directly from pail
- FBC System compatible
PERFORMANCE: UL Classified system rated for up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM E1399, ASTM C834, ASTM E90 and CAN/ULC-S115; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; STC Rating 62
SKU: n/a -
Firestop Accessories
Denver Foam Backer Rod
DESCRIPTION: Non-gassing backer rod used as backing for elastomeric & other applied caulking sealants, controlling the depth of applied sealants & ensuring cross-sectional hourglass configuration.
FEATURES:
- Easy to use
- Economical
- Allows air to reach both sides of sealant offering a faster & more uniform cure
- Will resist oil, gasoline & most solvents
- Odorless & will not stain
SKU: n/a
