Products
Showing 31–45 of 224 resultsSorted by price: high to low
-
Wraps, Strips and Putties
Metacaulk Cover Guard
DESCRIPTION: Precured dry intumescent one-component fire-rated gasket for use with electrical boxes when addressing steel electrical box penetrations in fire-rated assemblies (the “24 inch rule”).
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; applied by hand; mounted on inside of cover plate & installed simultaneously
- Covers opening; does not take up volume in electrical box
- Economical, labor-saving (compared to putty pads); great for retrofit jobs
- Reduces sound transmission
PERFORMANCE: Tested in accordance with ASTM E119 (UL 263), ASTM E814 (UL 1479) and ASTM E90; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; STC Rating 54
SKU: n/a -
Devices and Large Openings
Metacaulk Composite Sheet
DESCRIPTION: Preassembled panel constructed of precured dry intumescent sheet sandwiched between two thin, rigid steel panels, for enclosing large openings and for cutting and forming to custom or irregular shapes. Used for sealing penetrations and/or restoring fire rating to floors, walls and ceilings with penetrating openings, and can be used in conjunction with other Metacaulk products (sealants, putties and collars) to ensure cold smoke seal.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Lightweight, thin sheets are easy to handle, cut and form to desired or irregular shape
- Easy to install using common trade tools; fasten, bolt punch or drill through using self-tapping screws or anchor bolts; no mixing or damming for clean install; cost-effective low labor install; is re-enterable
- Non-flame supporting and thermally conductive: allows unwanted heat build-up to escape
- Corrosion resistant
- FBC System compatible
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479); VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Devices and Large Openings
Metacaulk Cast-In-Place Device (CID)
DESCRIPTION: Single-component device with precured dry intumescent, for casting into concrete, that provides through-floor penetration firestop protection for plastic pipes, metal pipes, insulated pipes and all types of cabling.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Reduces labor time by eliminating need for drilling of concrete
- Accessories include snap-on height extensions, corrugated floor deck adaptors, and installation snap-on cover caps
- FBC System compatible
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115; VOC compliant (CDPH Standard Method v1.2); Class 1 W Rating; complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Box Guard
DESCRIPTION: Precured dry intumescent one-component fire-rated pad for use in electrical boxes to maintain the integrity of fire-rated wall assemblies.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; applied by hand; adheres to back of electrical box
- Economical, labor-saving (compared to putty pads); great for retrofit jobs
- Reduces sound transmission
PERFORMANCE: UL Classified system; tested in accordance with ASTM E90, ASTM E814 (UL 1479) and ASTM E119 (UL 263); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; STC Rating 53
SKU: n/a -
Sealants and Sprays
Metacaulk 835+ Firestop Silicone Sealant & Spray
DESCRIPTION: Silicone-based elastomeric sealant, self-leveler and spray for firestopping joint openings where constant dynamic movement is expected.
FEATURES:
- Exterior/Interior use; resistant to weather and chemical exposure
- Forms a water/rain-resistant seal after 1 hour; excellent moisture resistance
- 2-year shelf life
- Excellent freeze-thaw
- Non-sag, flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- FBC System compatible (except spray)
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM E1399 and ASTM E90; Self Leveling: meets ASTM C920, Type S, Grade SL, Class 25, Use NT, M, A; Caulk, 5 Gallon, Cartridge: meets ASTM C920, Type S, Grade NS, Class 25, Use NT, M, G, A, O; VOC compliant (CDPH Standard Method v1.2); STC Rating 55
SKU: n/a -
Sealants and Sprays
Metacaulk 150+ Firestop Sealant
DESCRIPTION: All-purpose, heat-expanding sealant for construction joints and through-penetrations.
FEATURES:
- Excellent freeze-thaw
- Non-sag, flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- Versatile interior use; water-based seal requires no mixing or dilution; paintable
- Protected in wet & dry stages against mold growth with a combination of biocides
- Safe and easy to use for most applications (including retrofit); can be applied with conventional caulking gun, bulk loading gun, troweled from pail, or pumped directly from pail
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM C834, ASTM E1399, ASTM E90, and CAN/ULC-S115; VOC compliant (CDPH Standard Method v1.2); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; STC rating 65
SKU: n/a -
Sealants and Sprays
Metacaulk 1200 Firestop Sealant
DESCRIPTION: Extremely flexible single-component elastomeric sealant and spray for construction joint openings, curtain walls and large openings containing metallic penetrants, which cures to mastic suitable for dynamic movement areas and fire-rating.
FEATURES:
- 3-year shelf life
- Excellent freeze-thaw
- Non-sag, highly-flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- Versatile interior use; water-based seal requires no mixing or dilution; paintable
- Protected in wet & dry stages against mold growth with a combination of biocides
- Easy to apply: sprayable, brushable, trowelable, caulkable, & pourable- mastic grade for efficient installation on long joint runs, self-leveling for horizontal use when fast installation is needed & caulk grade for easy-to-apply using caulk gun/trowel
- FBC System compatible
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM E1399, and ASTM E90; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; VOC compliant (CDPH Standard Method v1.2); STC Rating 65
SKU: n/a -
Sealants and Sprays
Metacaulk 1000 Intumescent Firestop Sealant
DESCRIPTION: General-use, single-component, intumescent sealant and smoke seal for construction joints & through-penetrations. Cures to elastomeric seal suited to dynamic motion.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- 3-year shelf life
- Excellent freeze-thaw
- Non-sag, flexible cure; cures to an elastomeric seal suitable where dynamic movement is expected
- Versatile interior use; water-based seal requires no mixing or dilution; paintable
- Protected in wet & dry stages against mold growth with a combination of biocides
- Safe and easy to use for most applications (including retrofit); no special skills necessary to install; can be applied with conventional caulking gun, bulk loading gun, troweled from pail, or pumped directly from pail
- FBC System compatible
PERFORMANCE: UL Classified system rated for up to 4 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079), ASTM E1399, ASTM C834, ASTM E90 and CAN/ULC-S115; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; STC Rating 62
SKU: n/a -
Firestop Accessories
Denver Foam Backer Rod
DESCRIPTION: Non-gassing backer rod used as backing for elastomeric & other applied caulking sealants, controlling the depth of applied sealants & ensuring cross-sectional hourglass configuration.
FEATURES:
- Easy to use
- Economical
- Allows air to reach both sides of sealant offering a faster & more uniform cure
- Will resist oil, gasoline & most solvents
- Odorless & will not stain
SKU: n/a -
Wraps, Strips and Putties
BlazeSeal Fire Strip
DESCRIPTION: Flexible, precured dry intumescent strips installed as an integral part of fire door assemblies to provide a positive pressure seal in the clearance area between the door and frame, at the assembly threshold, through hardware such as closers and locks, or in frame assemblies utilizing fire-rated glass in both doors and side lites.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; ready to use
- Virtually air-tight butterfly damper rubber gasket delivers superior seal when closed
- Cost effective; less material required
- Highly versatile, flexible
PERFORMANCE: Tested in accordance with ASTM E1966 (UL 2079), DIN 4102-1, the fire door standards UL 10C and NFPA 252, and complies with the requirements of IBC 716.2; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; Compliant with the Buy America Act
SKU: n/a -
Wraps, Strips and Putties
Blaze Foam
DESCRIPTION: Precured dry intumescent strips and compressible foam used in head-of-wall, wall-to-wall and bottom-of-wall joint applications both static and dynamic.
FEATURES:
- Quick and easy one-step installation
- Not affected by temperature
- No hazardous ingredients
- No mechanical fastening required
PERFORMANCE: UL Classified system up to 2 hrs in gypsum walls; tested in accordance with ASTM E1966 (UL 2079) and ASTM E90; L Rating < 1 CFM/LF; STC Rating 64; Compliant with the Buy America Act
SKU: n/a -
Metacaulk Acoustic Products, Wraps, Strips and Putties
Acoustic Foam
DESCRIPTION: Compressible sound protection foam for building assemblies (all 1 & 2 hr gypsum wallboard assemblies) in head-of-wall, wall-to-wall and bottom-of-wall joint applications both static and dynamic.
FEATURES:
- Max joint width range between 1/4″ and 1″
- Up to 75% compression
- 100% extension capabilities
- Accommodates dynamic movement
- STC rating 64
SKU: n/a -
Interior Seismic Floors, Expansion Joint Systems, Surface Plate Series
BHSF – Hinge Plate
RELATED: BHSFL
JOINT SIZE: 3-24″ (Custom larger sizes may be available; contact Balco directly)
MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear varies
FEATURES: Heavy duty plate; Easy to install; Designed for pedestrian loading; Surface mount installation only; Ships in 10′ lengths
PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits
LOAD: Pedestrian (See Load Data Sheet for details)SKU: n/a -
MetaFlex®, 2 Hour Wall
MPSW2H (MetaFlex® Pro Shear MAX Wall) – 2 Hour
RELATED: MPSWC2H, MPSWI2H
JOINT SIZE: 20-48″ (max 39-72″ open)
MOVEMENT: ±50% to ±100% Expansion/Contraction, Lateral and Vertical Shear Vary (by Joint Size)
FEATURES: Fire-resistant barrier for larger vertical expansion joints; Doubles as smoke barrier; Fire protection from both directions; Convenient two-package installation; Intuitive lap splicing; Ships in 4′ lengths; Can be integrated with Balco Expansion Joint Systems
PERFORMANCE: Fire resistance rating of 2 hours tested in accordance with ASTM E1966 and UL 2079; Air leakage (L rating in SCFM/LF) of 3.88 ambient & 4.16 heated per UL 2079, meets IBC 715.6; Intumescent BlazeSeal™ seal beneath flanges is tested in accordance with UL 1479; Seismic, Thermal and Wind movement tested per standard ASTM E 1399; Contributes to LEED® creditsSKU: n/a
