NEW Product: FPH-300-PL-100 – Two-Component IllumiTread Stair Nosing

News Posted February 1, 2023

The FPH-300-PL-100 is our newest two-component PL stair nosing with many notable features. The textured surface provides ultra-high traction without the need for abrasive infill, making this ideal for cost-competitive applications where material is needed onsite quickly. The design also features a labor-saving, patent-pending flip cover which eliminates the need for wood blocking protection boards or other temporary covers during installation.

Learn More

NEW Product: 2125 – Retrofit IllumiTread Stair Nosing

News Posted February 1, 2023

Introducing the 2125 IllumiTread Retrofit Stair Nosing, our most cost-effective stair nosing to date. The extrusion has a very low profile (33% thinner than our 4120) while still accommodating our high-performing PL strip. It also has been designed to entirely eliminate the need for abrasive infill with a textured surface providing ultra-high traction. The 2125 is installed with adhesive only, which saves on labor compared to fasteners. Also, the adhesive installation process is quieter and less disruptive to day-to-day business operations when retrofitting in occupied buildings.

Learn More

NEW Heavy Duty Twin Hinge (HDTH)

News Posted July 22, 2022

Introducing a brand-new floor system with high load capability, low ‘bump’ configuration, and quick shipment. The HDTH fills the gap in the product lineup between the pedestrian loads of our 7500 Series and the higher-end HDNB. This system is able to withstand heavy loads from floor cleaners, hospital loading, scissor lifts, carts, pallet jacks, trollies, slow vehicular traffic, people movers/golf carts, all the way up to Forklift (Class 2). The HDTH is available from 1-4″ joint sizes at ±25% movement.

Learn More

6GW, 6GWC, SS6GW, SS6GWC Extended

News Posted May 11, 2022

We have taken our 6000 Glide Plate Series (the 6GW, 6GWC, SS6GW and SS6GWC) to the larger sizes of 10″ and 12″ (nominal), as well as modified the cover splicing to be easier and faster (requiring only KTC clips between butted plates, eliminating the need for any in-field grinding). These changes accommodate the need for slightly larger wall/ceiling covers, but where the flush, no-exposed-fastener look of the Glide Plate Series is still preferred.

Learn More

BCP Extended

News Posted May 11, 2022

We have essentially doubled the sizes offered for our BCP system, our economical plate cover for carpet applications in smaller joints. Originally available in only 1″ & 2,” we now offer standardized joint sizes 3″ and 4.”

Learn More

CM, CMX, 9W, FR, LPR Extended

News Posted May 11, 2022

We have extended the sizes of CM, CMX, 9W wall, 9W roof, FR and LPR to up to 18″ at ±100% movement and up to 24″ at ±50% movement. This provides a better go-to cover solution for medium-to-large joint sizes in roofs and walls.

How to Select the Right Expansion Joint System

News Posted June 1, 2020

Expansion joint cover systems are an important part of commercial construction. They provide structures with flexibility, allowing building movement to occur safely. They also support the required traffic, withstand the

Read More
Feedback

Download Access

Enter your email address below in order to download.

This field is for validation purposes and should be left unchanged.

×