Products
Showing 196–210 of 224 resultsSorted by price: low to high
-
Devices and Large Openings
Metacaulk Mortar
DESCRIPTION: Rapid-hardening compound of gypsum and cement for large opening through-penetrations in floors and walls (ideal for cable trays, power cables, fiber optic telephone cables, etc. [not aluminum]).
FEATURES:
- Best combination of workability, strength & fire resistance; safe and simple to use; high yield per pound
- Workable in approximately 45 minutes with non-sag adjustable consistency (pourable or trowelable); no special tools needed to mix or install
- Ideal for large openings containing multiple penetrants
- Sets without shrinking; forms rigid, gas tight, fire-resistant seal that can easily be cut/drilled/resealed if future penetrants are needed
- Protected in wet & dry stages against mold growth with a combination of biocides
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479)
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Putty Pads
DESCRIPTION: Moldable, non-curing, single-component, intumescent pliant in pad form for through-penetration systems.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- For interior use with various penetrations (cabling, EMT pipe, conduit, etc.); no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
- Easy to install; applied by hand; no curing time; adheres to all common building surfaces
- Helps provide a barrier or buffer for energized bus ducts or conduits as well as provide a barrier from vibration and movement; no additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box
- Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and ASTM E119 (UL 263); STC Rating 60; only 1/8″ thickness needed for 1-2 hr fire rating; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Putty Sticks
DESCRIPTION: Moldable, non-curing, single-component, intumescent pliant in stick form for through-penetration systems.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- For interior use with various penetrations (cabling, EMT pipe, conduit, etc.); no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
- Easy to install; applied by hand; no curing time; adheres to all common building surfaces
- Helps provide a barrier or buffer for energized bus ducts or conduits as well as provide a barrier from vibration and movement; no additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box
- Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E119 (UL 263); VOC compliant (CDPH Standard Method v1.2); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; STC Rating 60
SKU: n/a -
Sealants and Sprays
Metacaulk RS 136 Fire Block / Smoke Seal Caulk
DESCRIPTION: Incombustible fire-block, smoke-seal, acoustic-block and draft-stop caulk that beds and seals small voids, splices and gaps. Not for use in continuous vibration or wet environments.
FEATURES:
- Inorganic material with no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
- An easy installation sealant with water cleanup capabilities; no mixing or special skills necessary & no required additives; applied with a conventional caulking gun
- Excellent freeze-thaw
- 2-year shelf life
PERFORMANCE: UL Classified system; tested in accordance with ASTM E136
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Wrap Strip
DESCRIPTION: Flexible, precured dry intumescent strips used mainly for plastic & insulated pipe applications, wrapped simply around penetrating item(s) to completely fill annular space. In addition, for use with a universal collar for engineered plastic pipes 8 in. diameter and greater.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; no cure time
- Excellent freeze-thaw
- Highly versatile, flexible; economical
- Long length means less waste
- Systems up to 14″ PVC
PERFORMANCE: Tested in accordance with ASTM E814 (UL 1479); VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero
SKU: n/a -
Firestop Accessories
Safing Mineral Wool
DESCRIPTION: MinWool1200 Industrial Board Insulation is made of basalt volcanic rock fibers with thermosetting resin binder. Advanced production ensures reliable quality, high fiber density & low shot content for high temperature heat control & fire resisting use.
FEATURES:
- Thermal insulation gives control over heat loss for lower operating costs
- Easy to handle, fabricate & cut with a knife; clean handling reduces irritation and minimizes clean-up & expense
- Does not support fungi/mold
PERFORMANCE: Tested in accordance with ASTM E84 (UL 723), CAN/ULC-S102-M (flame spread rating of 5 and smoke developed rating of 0; faced insulation has flame spread rating of 25 and smoke developed rating of 5); noncombustible in accordance with ASTM E136 and CAN4-S114-M
SKU: n/a -
Acoustical Joints & Partition Closures, Sealants and Sprays
Smoke and Acoustic Sealant (SAS)
DESCRIPTION: High-grade acrylic latex sealant that permanently seals non-rated through-penetrations, membrane openings, and static & dynamic joints in smoke & sound-rated assemblies, impeding the transfer of sound.
FEATURES:
- Interior use; excellent for large openings; may be used in vertical and horizontal assemblies in linear joints in walls or floors
- 3-year shelf life
- Flexible set, water cleanup capabilities; paintable; easy to dispense
- Protected in wet & dry stages against mold growth with a combination of biocides
PERFORMANCE: Tested in accordance with ASTM E834 and ASTM E90; VOC compliant (CDPH Standard Method v1.2); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; meets LEED criteria under Environmental Air Quality and Regional Materials; STC rating 69; Compliant with the Buy America Act
SKU: n/a -
Foam Seal Systems, Foam Seal Systems, Foam Seal Systems
BSLJ
JOINT SIZE: 6-15″
MOVEMENT: ±25% Expansion/Contraction
FEATURES: Closed cell, stabilized polymer foam; Colorized silicone coating face (See Color Chart for details); Easy to install; Does not require mechanical fasteners; Conforms to joint irregularities, provided they are not sudden or extreme; Excellent mildew resistance; Excellent compression recovery; Watertight, dust-proof, airtight, sound resistant, insulated; Not based on asphaltic or bitumastic impregnation
PERFORMANCE: Meets 120 psi min. tensile strength and 250% tensile elongation per ASTM D3575; Meets 21.5lbs/in tear resistance per ASTM D624; Seismic, thermal and wind movement per ASTM E1399 standard; Contributes to LEED® credits
LOAD: Metal joint cover required
SKU: n/a -
Metal Cover Systems, No Bump Series, Industrial (Forklift)
HDTH – Heavy Duty Twin Hinge
RELATED: HDTHL
JOINT SIZE: 1-4″
MOVEMENT: ±25% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies
FEATURES: Heavy duty/Industrial; Interlocking, recessed, all-metal cover designed for heavy loading; Designed for minimal “bump” across floor transitions; Blockout installation only; Ships in 10′ lengths
PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits
LOAD: Pedestrian, Gurney/Bed, X-ray, Floor Sweeper, Passenger Cart, Palletjack (5500lb capacity), Forklift (Class 2, 3370lb capacity), Scissor Lift, Slow Vehicular (See Load Data Sheet for details)SKU: n/a -
MetaFlex®, 2 Hour Wall
MPSW2H (MetaFlex® Pro Shear Wall) – 2 Hour
RELATED: MPSWC2H
JOINT SIZE: 4-12″ (max 8-18″ open; see MetaFlex Pro Shear MAX 2Hr for larger sizes)
MOVEMENT: ±50% to ±100% Expansion/Contraction, Lateral and Vertical Shear Vary (by Joint Size)
FEATURES: Fire-resistant barrier for vertical expansion joints; Doubles as smoke barrier; Fire protection from both directions; Convenient single-package installation; Intuitive lap splicing; Ships in 10′ lengths; Can be integrated with Balco Expansion Joint Systems
PERFORMANCE: Fire resistance rating of 2 hours tested in accordance with ASTM E1966 and UL 2079; Air leakage (L rating) <5 SCFM/LF per UL 2079, meets IBC 715.6; Intumescent BlazeSeal™ seal beneath flanges is tested in accordance with UL 1479; Seismic, Thermal and Wind movement tested per standard ASTM E 1399; Contributes to LEED® creditsSKU: n/a -
Metacaulk Acoustic Products, Sealants and Sprays
Metacaulk Smoke and Acoustic 90 (SAS 90)
DESCRIPTION: High-quality sealing compound comprised of acrylic latex essential for non-fire-rated penetrations and joints in achieving and maintaining the required Sound Transmission Class (STC) rating for airborne sound and preventing the passage of smoke and toxic gases in smoke barrier partitions, as required by the IBC.
FEATURES:
- Excellent freeze-thaw
- High adhesion, tough long-lasting bond
- 2-year shelf life
- Flexible, non-sag set, water cleanup capabilities; paintable
- Mold and mildew resistant
PERFORMANCE: Tested in accordance with ASTM E90, ASTM E84, ASTM C834, ASTM C919, ASTM G21; Low VOC content; meets LEED V4 Emissions requirements; STC rating 62
SKU: n/a -
No Bump Series, Industrial (Forklift)
SBNB – Shallow Blockout No Bump
RELATED: SBNBL
JOINT SIZE: 3-18″ (Custom larger sizes may be available; contact Balco directly)
MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies
FEATURES: Designed for heavy loading and no “bump” across floor transitions; Centering bar device holds cover in place throughout movement (SBNBL excluded); Blockout installation only; Comes standard with water barrier; Drain assemblies available; Ships in 10′ lengths
PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits
LOAD: Pedestrian, Class FL 2 Forklift, Slow Vehicular* (See Load Data Sheet for details)
SKU: n/a -
Retrofit, Retrofit Stair Nosings
2125 – Thin Surface Mount 1″ PL Strip
FEATURES: Fastened to the leading edge of existing stairs; Cost-effective design accommodates standard, code-compliant, durable, aluminum-backed PL strip which charges by variety of light sources (LED, fluorescent, etc.)*; Thin extruded aluminum base; 2.125″ Width; Ships in max of 10′ lengths
ANCHORS: Adhesive-only, wood and concrete options available
PERFORMANCE: Passes UL 1994 for both interior and exterior applications; Meets IBC/IFC 1025; Passes salt spray resistance per ASTM B117; Passes toxicity test per SMP 800C; Passes flame spread test per ASTM D635; Nonradioactive per ASTM D3648; Meets ADA guidelines for slip resistance; Contributes to LEED® creditsSKU: n/a -
Two Component, Cast-in/Blockout Stair Nosings
FPH-300-PL-100 – Two Component
FEATURES: Highly slip-resistant directionally textured surface without need of abrasive epoxy; Patent-pending “flip-cover” design with reversible top component acting as own wood block protection during installation; Charges by variety of light sources (LED, fluorescent, etc.)*; Narrow profile of dual extruded aluminum components; Cast-in anchors only; 3″ width; Ships in max of 10′ lengths
PERFORMANCE: Passes UL 1994 for both interior and exterior applications; Meets IBC/IFC 1025; Passes salt spray resistance per ASTM B117; Passes toxicity test per SMP 800C; Passes flame spread test per ASTM D635; Nonradioactive per ASTM D3648; Meets ADA guidelines for slip resistance; Contributes to LEED® creditsSKU: n/a
